0.0
0 votos
|
Em formação
Autor (es):
Fukumoto Nobuyuki
Artista:
Fukumoto Nobuyuki
A língua
Português
Liberado:
2008
Postar
Enviar postagem
Seosamh Mistéil
Dec 12, 2020
|
oh hey its danagnronpa 2 goodbye dispair. damn they should change the goodbye dispair part
eSUN 3D
Dec 06, 2022
|
Analysis of the Causes of 3D Printer Resin Cracking Problems
Resin 3d printing materials cracking is mainly divided into the following reasons:
1. The concentration of cleaning agent used in the cleaning process is not enough, and the residual 3D printer resin invades the surface of the printed part, making the surface of the printed part inconsistent with the internal stress, resulting in cracked surface cracking.https://www.esun3d.com/
2. The model has been hollowed out inside, there is a large amount of uncured resin 3d printing materials , and the interior is not completely cleaned with alcohol, or the wall thickness of the model after hollowing out is not enough (less than 3mm), and the thin-walled model will be damaged due to the uncured interior. The stress and the solidified thin wall produce molecular structure pulling, which leads to the overall collapse of the model.
3. Put the 3d printer resin model under a UV lamp of more than 30W for close-range one-way curing for a long time. Excessive secondary curing will cause uneven internal and external stress or inconsistent light reception before and after, resulting in interlayer cracking.
4. Do not blow dry the alcohol after cleaning, let the resin 3d printing materials model dry naturally and place it in the sun to receive light from one direction, forming deformation and cracking caused by strong pulling on the surface and internal stress.
5. Care should be taken when using water washable resin. https://www.esun3d.com/water-washable-resin-product/
Do not wash in water for a long time. After cleaning, dry it with a hair dryer as soon as possible. When storing the water washable resin model, avoid humid and high-temperature environments.
Resin 3d printing materials cracking is mainly divided into the following reasons:
1. The concentration of cleaning agent used in the cleaning process is not enough, and the residual 3D printer resin invades the surface of the printed part, making the surface of the printed part inconsistent with the internal stress, resulting in cracked surface cracking.https://www.esun3d.com/
2. The model has been hollowed out inside, there is a large amount of uncured resin 3d printing materials , and the interior is not completely cleaned with alcohol, or the wall thickness of the model after hollowing out is not enough (less than 3mm), and the thin-walled model will be damaged due to the uncured interior. The stress and the solidified thin wall produce molecular structure pulling, which leads to the overall collapse of the model.
3. Put the 3d printer resin model under a UV lamp of more than 30W for close-range one-way curing for a long time. Excessive secondary curing will cause uneven internal and external stress or inconsistent light reception before and after, resulting in interlayer cracking.
4. Do not blow dry the alcohol after cleaning, let the resin 3d printing materials model dry naturally and place it in the sun to receive light from one direction, forming deformation and cracking caused by strong pulling on the surface and internal stress.
5. Care should be taken when using water washable resin. https://www.esun3d.com/water-washable-resin-product/
Do not wash in water for a long time. After cleaning, dry it with a hair dryer as soon as possible. When storing the water washable resin model, avoid humid and high-temperature environments.
Elise Elleneth
Dec 12, 2018
|
I updated my project ESCORT (novela) Chapter 1, Part 3 "The Pink Butterfly"... Have a good day all!
TalkingM.
Aug 14, 2018
|
#TsugumomoEl "Willy" de Kazuya es el primer paso al igual que el secreto para la energía inagotable :v
ReiZerPS
Aug 18, 2018
|
#My-Brother-039-s-Slipped-Inside-Me-in-The-Bathtub4 estrellas pa que las ponga en 4 lo más rápido.
Avisma
Aug 12, 2018
|
#Tsugumomopinshe kazuya tiene potencial y resistencia para complacer a su harem y mas y aun asi no lo aprovecha :v
3L!4Z
Mar 18, 2019
|
Hola. Nueva actualización de mi novela, abandoned un the forest, capitulo 4
https://es.niadd.com/chapter/Chapter_Four_The_Truth/100039010/ link.
https://es.niadd.com/chapter/Chapter_Four_The_Truth/100039010/ link.
Setsuko Naoki
Aug 18, 2018
|
#Boyfriend-of-the-deadsin rivales durante todo el manga y de repente te meten dos en solo 4 capitulos 😂😂
axgidend
Aug 18, 2018
|
#Versatile-Magechapter 4 and i haven't see any magic from the MC, the art style is good, but the story is taking longer than expected
Juan Manuel Vazquez Aguilar
Aug 18, 2018
|
#Yu-Gi-Oh-ARC-Vpinche Yuya , por que no eras así de roto en el anime
Keergo
Jul 02, 2018
|
Dear, I want to buy remove the ads. But I do not find in any part the option, in the old application it appears to me that the articles are not available and in the new one I leave blank.
Relatório
Você tem algum problema ou sugestão, não hesite em nos contatar.
|
Transmite
Enviar
@
Emoji
😀
😁
😂
😄
😆
😉
😊
😋
😎
😍
😘
🙂
😐
😏
😣
😯
😪
😫
😌
😜
😒
😔
😖
😤
😭
😱
😳
😵
😠
🤔
🤐
😴
😔
🤑
🤗
👻
💩
🙈
🙉
🙊
💪
👈
👉
👆
👇
🖐
👌
👏
🙏
🤝
👂
👃
👀
👅
👄
💋
💘
💖
💗
💔
❤
💤
💢
Clubes
Carregar página anterior
Carregar próxima página
Amigos
Carregar página anterior
Carregar próxima página
|
Cenário
Youtube
Vídeo
Enviar
|
Cenário
Youtube
Vídeo
Enviar
*O formato da url não é válido, verifique e tente novamente por favor
Emoji
😀
😁
😂
😄
😆
😉
😊
😋
😎
😍
😘
🙂
😐
😏
😣
😯
😪
😫
😌
😜
😒
😔
😖
😤
😭
😱
😳
😵
😠
🤔
🤐
😴
😔
🤑
🤗
👻
💩
🙈
🙉
🙊
💪
👈
👉
👆
👇
🖐
👌
👏
🙏
🤝
👂
👃
👀
👅
👄
💋
💘
💖
💗
💔
❤
💤
💢
Clubes
Carregar página anterior
Carregar próxima página
Amigos
Carregar página anterior
Carregar próxima página
|
Cenário
Youtube
Vídeo
Enviar
Envio vídeo
Comece a fazer o upload
*O tipo de vídeo deve ser MP4
Emoji
😀
😁
😂
😄
😆
😉
😊
😋
😎
😍
😘
🙂
😐
😏
😣
😯
😪
😫
😌
😜
😒
😔
😖
😤
😭
😱
😳
😵
😠
🤔
🤐
😴
😔
🤑
🤗
👻
💩
🙈
🙉
🙊
💪
👈
👉
👆
👇
🖐
👌
👏
🙏
🤝
👂
👃
👀
👅
👄
💋
💘
💖
💗
💔
❤
💤
💢
|
|